How To Open Camera Battery Latch Ek7000

AKASO EK7000 Action Photographic camera
User Manual

Was ist in der Box

YOUR EK7000

1. Shutter / Select Push
2. Working / Wi-Fi Indicator
3. Ability / Style / Leave Button
4. Charging Indicator
5. MicroSD Slot
6. Micro USB Port
7. Micro HDMI Port
8. Lens
9. Screen
10. Up Button
11. Down / Wi-Fi Push
12. Battery Door

Annotation: Camera does non record audio when information technology is in the waterproof instance.

GETTING STARTED

Welcome to your new EK7000. To capture video and photos, you lot need a microSD card (sold separately).

MICR SD CARDS

Use brand name retentiveness cards that meet these requirements:

• MicroSD, microSDHC, or micr SDXC
• Class x or UHS-I rating
• Capacity upward to 32GB (FAT32)

Note:

1. Please format the microSD card commencement in this photographic camera before using. To keep your microSD
   bill of fare in good condition, reformat it on a regular basis. Reformatting erases all of your
   content, so be sure to offload your photos and videos first.
2. FAT32 format microSD menu stops recording when the storage of each file is over 4GB
   and starts to record again on a new file.

POWERING ON AND OFF

To Power On:
Printing and concord the Mode button for three seconds. The camera beeps while the camera status lights low-cal. When information appears on the LCD brandish or the photographic camera condition screen, your photographic camera is on.

To Ability Off:
Press and hold the Mode push for three seconds. The photographic camera beeps while the camera status lights is off.

SWITCHING Fashion

To Switch Style:
Press the Fashion button to switch the fashion.

To Get out Mode:
Press the Mode push button to get out fashion.

TURNING ON / OFF Wi-Fi

To turn on Wi-Fi
Turn on camera, press Down button to plough on Wi-Fi.

To turn off Wi-Fi
Press Down button to turn off Wi-Fi.

OVERVIEW OF MODES

There are 5 modes: Video, Photograph, Burst Photo, Time Lapse and Setting.

Video Style
Video Mode is the default style when yous plough on the camera.
In Video Manner, press Shutter button, the camera starts recording video. Press Shutter push to stop recording video.

Photo Mode
Press Mode push once to switch to Photograph Mode after you plough on camera.
In Photo Fashion, press Shutter push, the camera takes a photo.

Outburst Photograph Manner
Press Mode push several times to switch to Burst Photo Manner. In Flare-up Photo Mode, press Shutter button, the camera takes 3 photos per 2d.

Time Lapse Photo Mode
Printing Mode button several times to switch to Time Lapse Photograph Mode. In Fourth dimension Lapse Photograph Mode, press Shutter button, the camera takes a series of photos at 3s / 5s / 10s intervals.

Settings
Press Mode Push button several times to switch to settings mode. Press Upward or Down button to bike through options and press Shutter Button to select desired option.

CUSTOMIZING YOUR EK7000

Settings

1. Video Resolution: 1080P 60FPS, 1080P 30FPS, 4K 25FPS, two.7K 30FPS, 1080P 60FPS, 720P 120FPS, 720P 60FPS
   Default setting is 1080P 60FPS.
2. Looping Record: Off / On
   Default setting is off.
   Loop recording allows your photographic camera to overwrite old files with new files. In one case the memory
   card becomes full, the camera will delete the get-go video file to brand room for the latest file.
3. Time Stamp: Off, Date, Date & Time
   Default setting is Appointment & Time.
   If you plough on Time Postage stamp, this camera adds fourth dimension stamp to the videos or photos yous take.
   If you select Off, this camera volition not add fourth dimension postage stamp to the videos or photos you have.
4. Exposure: -2.0, -1.7, -1.iii, -1.0, -0.7, -0.3, 0.0, +0.3, +0.7, +1.0, +one.3, +1.seven, +ii.0
   Default setting is 0.0.
   By default, your camera uses the unabridged epitome to determine the advisable exposure level.
   However, Exposure lets you select an area that you lot want the camera to prioritize when
   determining exposure. This setting is specially useful in shots where an important region
   might otherwise exist over- or underexposed.
   When you change this setting, the LCD display immediately shows you the result on your
   prototype. If you change modes, the photographic camera returns to using the entire scene to determine
   the correct level of exposure.
5. Photo Resolution: 12MP, 8MP, 5MP, 4MP
   Default setting is 12MP.
6. Burst Photograph: 3 Photos
   Burst captures upwardly to iii photos in 1 second, then it is perfect for capturing fast-moving activities.
7. Time Lapse: 2s, 3s, 5s, 10s, 20s, 30s, 60s
   Default setting is 3s. Time Lapse Photo captures a serial of photos at specified intervals. Use this way to capture photos of whatsoever activeness, and then cull the best ones after.
8. Continuous Lapse: OFF / ON
   Default setting is Off.
   Plow on Continuous Lapse, this camera takes continuous lapse photo.
9. Ability Frequency: 50Hz, 60Hz, Auto
   Default setting is 50Hz.
10. Language: English language, 繁體中文, Italiano, Español, Português, Deutsch, Dutch, Français,
    Čeština, Polski, Türk, Pyccкий, Romaña, 日本語, Thai,
    Default setting is English language.
11. Date & Time: YY / MM / DD HH: MM
    Notation: If yous replace the battery, the date and time will reset.
12. Sounds Indicator
    Shutter: On / Off Commencement-up: On / Off
    Beep: On / Off Default setting is on.
    Sets the book of your EK7000's alerts.
    Volume: 0, 1, ii, 3
    Default setting is three.
    This option lets you adjust the volume. Press Shutter button to arrange the book.
13. Upside Down: Yep / No
    Default setting is No.
    This setting determines the orientation of your video or photos to assist you prevent upside
    downwardly footage.
14.  Screen Saver: OFF, 1min, 3min, 5min
    Default setting is 1min.
    Turns off the LCD brandish afterwards a period of inactivity to save bombardment life. To turn on the
    LCD display again, press any button on the camera.
15. Power Save: OFF, 1 min, 3 min, 5 min
    Default setting is three min.
    Powers off your EK7000 afterward a period of inactivity to save battery life.
16. Format: No / Aye
    To keep your microSD carte du jour in skillful condition, reformat it on a regular basis. Reformatting
    erases all of your content, so exist certain to offload your photos and videos first.
    To reformat your card, press the mode push several times to enter Photographic camera Setting, then
    press downwardly push button several times to enter Format and select Yes.
17. Reset: No / Yep
    This option resets all settings to their default values.
18. Version
    You can check the model and updated time of your EK7000.

CONNECTING TO THE ISMART DV APP

The iSmart DV app lets you lot control your camera remotely using a smartphone or tablet.
Features include full camera control, live preview, playback and sharing of content.

1. Download iSmart DV app to your mobile device from the Apple App Shop or Google Play.
2. Turn on the camera, and then press Down button to turn on Wi-Fi.
3. Turn on Wi-Fi of your mobile device, connect to the Wi-Fi SSID 'iCam-AKASO'.
4. Enter the countersign: 1234567890.
5. Open the app iSmart DV.
6. Tap 'Add together new camera'.
7. Tap 'Wi-Fi Connect'

Note: Printing Downwards button if you want to turn off Wi-Fi.

PLAYING BACK YOUR CONTENT

You can play back your content on the camera's LCD display, your reckoner, Television set, or smartphone / tablet.

You can also play back content by inserting the microSD carte du jour directly into a device, such as a computer or compatible TV. With this method, playback resolution depends on the resolution of the device and its ability to play back that resolution.

VIEWING VIDEOS AND PHOTOS ON YOUR EK7000

1. Turn on photographic camera to enter Video or Photo mode.
2. Press Up push button in video or photograph mode to enter playback way. If you printing Up push button in playback style, the camera will get out playback style.
3. Printing Downward push, then Shutter button to open video or photo in full-screen view.
4. Press Up or Down push to playback photos. Printing Upwards or Downwards button, then Shutter button to playback videos.
5. To leave the video or photo files, press Mode button.

Annotation: If your micro SD card contains a lot of content, it might accept a infinitesimal for information technology to loa

DELETING VIDEOS AND PHOTOS ON YOUR EK7000

1. Turn on camera to enter Video or Photo fashion.
2. Press Upward push button in video or photo manner to enter playback mode. If you printing Up button
   in playback mode, the camera will get out playback mode.
3. Press Down push button, then Shutter button to open up video or photograph in full-screen view.
4. Press Up or Down button to locate the file you want to delete.
5. Press and concord the Shutter button for 3 seconds. The screen shows 'Delete this file? Yes No'
6. Printing Up push button, then Shutter push, the selected file will be deleted.

OFFLOADING YOUR CONTENT

OFFLOADING YOUR CONTENT TO A COMPUTER
To play back your video and photos on a computer, you lot must start transfer these files to a reckoner. Transferring also frees upwardly space on your microSD carte for new content.

To offload files to a figurer using a menu reader (sold separately) and your computer's file explorer, connect the bill of fare reader to the figurer, then insert the microSD card. You lot tin and so transfer files to your computer or delete selected files on your bill of fare. Note that you lot must use a carte du jour reader to offload photos or audio files.

OFFLOADING YOUR CONTENT TO SMARTPHONE OR TABLET

1. Connect to the iSmart DV app.
2. Open the iSmart DV app.
3. Tap 'iCam-AKASO' at the top of the screen.
4. Tap file icon at the left corner of the bottom screen.
5.  Tap 'Cull'
6.  Tap the files you desire to save.
7.  Tap at the right corner of the bottom screen. The screen shows 'Ostend Download'.
8. Tap 'Confirm Download'.
9. Tap 'Save Images'.

Notation:

1. If you cannot offload videos or photos to iPhone or iPad, please enter Setting -> Privacy -> Photos , find "iSmart DV" and select "Read and Write".
2.  Yous cannot download 4K or 2.7K video to iPhone and iPad via Wi-Fi app. Delight offload 4K or 2.7K videos via card reader.

REFORMATTING YOUR MICROSD CARD

To keep your microSD card in good condition, reformat it on a regular basis. Reformatting erases all of your content, so be sure to offload your photos and videos get-go.

1. Turn on camera.
2. Printing Mode button iv times, then Shutter button to enter Camera Setting.
3. Printing Upwardly or Down button to locate the 'Format' option.
4. Press Shutter button, the screen shows 'No/Yes.'
5. Press Down button then Shutter push. The screen shows 'Waiting' and so 'Completed'. Then you format your microSD card successfully.

MAINTENANCE YOUR Photographic camera

Follow these guidelines to get the all-time operation from your photographic camera:

1. For best audio functioning, shake the camera or accident on the mic to remove droppings from the microphone holes.
2. To make clean the lens, wipe it with a soft, lint-free textile. Practice not insert strange objects around the lens.
3. Don't touch the lens with fingers.
4. Keep the camera away from drops and bumps, which may cause harm to the parts
   inside.
5. Continue the camera away from loftier temperature and strong sunshine to avoid existence
   damaged.

MAXIMIZING BATTERY LIFE

A message appears on the touch display if the battery drops beneath ten%. If the battery reaches 0% while recording, the photographic camera saves the file and powers off.
To maximize bombardment life, follow these guidelines when possible:

• Turn off Wireless Connections
• Capture video at lower frame rates and resolutions
• Utilise Screen Saver setting.

Battery STORAGE AND HANDLING

The camera contains sensitive components, including the bombardment. Avert exposing your camera to very cold or very hot temperatures. Depression or high temperature weather condition may temporarily shorten the battery life or cause the camera to temporarily end working properly. Avoid dramatic changes in temperature or humidity when using the photographic camera, as condensation may form on or within the camera.

Exercise non dry the camera or battery with an external heat source such as a microwave oven or hair dryer. Damage to the camera or bombardment caused by contact with liquid inside the camera is non covered under the warranty.

Practise not shop your battery with metallic objects, such as coins, keys or necklaces. If the battery terminals come up in contact with metallic objects, this may cause a fire.
Exercise non make whatever unauthorized alterations to the camera. Doing and so may compromise safety, regulatory compliance, performance, and may void the warranty.

Warning: Exercise not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate or pigment the camera or battery. Practice not insert foreign objects into the bombardment opening on the camera. Practice not use the photographic camera or the bombardment if information technology has been damaged – for example, if cracked, punctured or harmed past water. Disassembling or puncturing the bombardment can crusade an explosion or fire.

REMOTE

VIDEO

To record Video, verify the camera in Video mode.

To start recording:
Printing the Grey Video Button. The camera will emit one beep and the camera light will flash while recording.

To stop recording:
Press the Grey Video Push once more. The camera will emit ane beep and the camera light volition stop flashing while recording.

PHOTO
To capture a photo, verify the camera in Photograph manner.

To take a photograph:
Press the Red Photo Button. The photographic camera will emit a camera shutter sound.

CR2032 Battery REPLACEMENT FOR EK7000 REMOTE

1. Utilise a i.8mm Phillips tip screwdriver to remove the 4 screws on the back cover of the
   remote, assuasive you to open information technology.

ii. Remove another 4 screws on PCB board.

iii. Elevator the PCB board and slide out the bombardment, as shown in the picture.
Note: Do NOT rotate the PCB board to avoid reversing the photographic camera and video button functions.

4. Install the new bombardment, keeping the "+" pole facing up.
5. Install all 4 screws dorsum onto the PCB lath.

vi. Install all 4 screws back into the cover.

MOUNTING YOUR CAMERA

Adhere your camera to helmets, gear and equipment.

CONTACT US

For whatever inquires with AKASO products, please feel gratis to contact us, we will respond
within 24 hours.
Electronic mail: [email protected]
Tel: (888) 466-9222 (US) Mon-Fri (except holiday) 9am-5pm (EST)
Official website: world wide web.akasotech.com

Documents / Resources

References

• Affordable Activity Camera | Best GoPro Culling - AKASO

Source: https://manuals.plus/akaso/ek7000-action-camera-manual

Posted by: reidgropen.blogspot.com

Share this post