What Wrong If A Tasco Game Camera

Tasco Trail Photographic camera Instruction Manual 119270CW/119271CW

Of import NOTE

Congratulations on your buy of i of the best trail cameras on the market! Please refer to the notes below and the instructions in this manual to ensure that
you lot are completely satisfied with this product.

If your Tasco® Trail Camera does not seem to be functioning properly or if you lot are having photograph/video quality issues, delight check the Troubleshooting/
FAQ department on pages 13-sixteen.

Problems are often due to something simple that was overlooked, or require only changing one setting to solve.

If your problem continues after trying the solutions in the Troubleshooting/FAQ section, please call Tasco Customer Service at (800) 423-3537. In Canada, call
(800) 361-5702.

Tasco recommends using 8 Energizer® Lithium AA batteries in this trail camera to obtain maximum battery life.

Do not mix one-time and new batteries. Do not mix battery types-use ALL lithium or ALL alkaline. Rechargeable batteries are Non recommended.

Tasco recommends using SanDisk® SD and SDHC Cards (up to 32GB capacity) in this Tasco trail camera.

INTRODUCTION

About the Tasco Trail Photographic camera

Your new Tasco® Trail Camera is a digital scouting photographic camera. Information technology can be triggered by any movement of live animals in a location, detected by a highly sensitive Passive Infra-Red (PIR) motion sensor, and so have high quality photos (6MP
or 8MP resolution, depending on model), or video clips (720p, 10 seconds length).

The Tasco Trail Camera consumes very piddling power (< 0.5mA) in a stand up-by (surveillance) state. This means it tin evangelize up to six months stand-by operation time when the device is powered by eight AA alkaline batteries, and up to twelve months utilizing eight lithium AA batteries (30 images per solar day, 15 w/flash).

Once motion in the monitored area is detected, the digital camera unit will be triggered at once (typically less than 1 second) and then automatically take photos or videos (your choice). The Tasco Trail Photographic camera is equipped with congenital-in infrared (IR) LEDs that role as a flash, and then that it delivers clear photos or videos (in blackness & white) fifty-fifty in the dark, and information technology can take color photos or videos nether sufficient daylight. The Tasco Trail Photographic camera is designed for outdoor utilise and is water resistant.

PARTS and CONTROLS

Release the two latches on the right side of the camera and swing the front end encompass over to the left to access the controls. A 3-fashion ability/style switch is used to select the master operating modes: OFF, AIM, and ON (Fig. 1)

When the ability switch is gear up to the AIM center position, the photographic camera is in Setup Way. The AIM position can as well be used to verify the surface area the photographic camera will monitor. The LCD Display volition show the camera's current settings in Setup Mode. The Up, Downwards and OK keys are used to set the date and time (to be imprinted on each photo/video), change the interval or "detection delay" time between images while an animal remains in range of the camera'due south sensor, select Photo or Video capture mode, set a camera ID number for your reference, and format the SD carte (erase all files). Once you lot setup the camera, switch it to ON for normal performance.

Fig. 1

INSTALLING BATTERIES and SD CARD

Before y'all begin to utilize your Tasco Trail Camera, y'all will offset need to install a set of batteries and insert an SD card. Although that may only take y'all a minute, at that place are some important notes about both batteries and SD cards yous should be aware
of, so please accept the time to read the following directions and cautions:

Loading Batteries

Press the Battery Tray Squirt Push to release the battery tray and pull it out for loading (Fig. ii). Switch the camera's power OFF when loading/unloading batteries. Be certain to insert each bombardment then its polarity (+/- direction) matches the polarity
indications at the lesser of the battery tray.

The camera is capable of operating with merely 4 batteries installed if necessary, merely a full ready of 8 batteries should normally exist used to ensure the longest operating time. Tasco recommends using eight new lithium AA (Energizer® make) or element of group i AA batteries. NiMh Rechargeable batteries can as well be used, simply they might have a shorter life span due to their reduced efficiency over fourth dimension and at low temperature.

Inserting the SD Card

The Tasco Trail Camera uses a standard SD (Secure Digital) retention carte to save your photos (.jpg format) or videos (.avi format). SD and SDHC (Loftier Capacity) class iv or higher speed cards, up to a maximum 32GB are supported.

Brand certain that the write-protect switch on the side of the card is "off" (Not in the "Lock" position). With the power switch in the OFF position, insert the SD card in the slot on the lower right side of the camera (Fig. three) until it clicks
in identify. If the wrong side of the carte du jour is facing up, you will non be able to insert it without force-there is only 1 right style to insert cards.
If the SD card is not inserted correctly, or no card is in the slot, "Carte du jour" will announced on the LCD Brandish, and the camera will non operate (Fig. 4, next page). Other card status display letters: "FULL" indicates the carte du jour'due south
retentiveness is full, with no remaining room to shop files (see below). "Err" means there is a menu reading error (try a different SD carte du jour).
Formatting the SD carte du jour earlier using it for the first time is recommended, particularly when a card has been used in other devices. This can be done using the camera's "Format" function (pg. 8, "SD Menu Format"). Make sure
yous have backed up (saved to your calculator) whatever files you want to keep on a previously used bill of fare, as formatting erases ALL files.
To accept out the SD card, just gently button in the carte du jour (practise not try to pull information technology out without pushing in first). The card is released from the slot and set to be removed when you hear the click. Exist sure the photographic camera's ability is switched OFF before removing or inserting SD cards.

SETUP MODE

Once batteries are installed and an SD card is inserted, you're set up to get into the Setup Mode to get the camera prepare to utilise, with all options set to your preferences. While this can be done in the field (no computer or internet access is needed), most
users will probable want to setup the camera at home, in advance. At that place are only a few settings to make, then the procedure is quick and easy. To start setting upwardly your Tasco Trail Camera:

To enter Setup Mode, move the Power Switch to the middle (AIM) position (Fig. i). The display will come up on and prove the initial Setup screen (Fig. 5). Annotation: Don't worry if y'all detect the Condition LED flashing during the
Setup process-this is normal, as the AIM position of the switch has a second function that volition be covered after in this transmission.
Press the OK key to begin. When the display flashes, you can utilize the Up and Downward keys to alter the setting of the currently selected pick or item.
When you stop changing a setting (or leaving it set up "as is"), press OK to lock in the setting and move on to the next option/item. If there is a setting that y'all don't need or desire to alter from the default or current setting, simply
press OK to ostend and skip to the adjacent item/option. Once you lot go through the Setup Fashion items and modify a few settings, you'll quickly see how this works.

SETUP MODE

Setting Time and Date (Fig. 6)

Subsequently the Initial Setup screen, the next few brandish screens will allow you to set up the electric current time and date, and then the fourth dimension/date stamp imprinted on all your photos and videos will be accurate when captured by the camera. To change the Fourth dimension and Date to be electric current, starting at the default "12 : 00" screen (meet Fig. 6):

Press OK and use UP/DOWN to set the hour (24 hr/ war machine fourth dimension format). Printing OK to ostend.
Use Upward/Downwardly to gear up the minute. Press OK to confirm.
Apply UP/Downwardly to set the calendar month. Press OK to confirm.
Use Upwards/DOWN to gear up the date. Printing OK to confirm.
Use Upward/DOWN to fix the twelvemonth. Press OK to confirm and motility on to the next Setup item, Interval Time.

Setting Interval (Detection Delay) Time (Fig. vii)

The Interval or Detection Delay option lets you lot set the time between captured images when an animal remains within the photographic camera'south sensor range after it is get-go detected and the photographic camera is triggered. Use Upward/Downwards to select 5 sec (display shows "00:05"), 15 sec (default value), 30 sec, one min (brandish shows "01:00") or 5 min. Printing OK later on setting.

Setting Capture Mode (1 photo, 3 photos, or video) (Fig. 8)

Use Upwards/DOWN to select your preferred image capture way: Single Photo per trigger (display shows 1 + a even so camera icon), Rapid Sequence of 3 Photos per trigger (display shows a nevertheless camera icon + 3) or Video Clips that are x seconds long at 720p resolution (display shows a moving-picture show camera icon). Press OK after setting.

Setting Camera ID# (if using multiple cameras) (Fig. 9)

Use Upwardly/DOWN to select a reference ID# (from "01" to "99") for this camera, which will exist imprinted on all photos/videos forth with the time & date. If you are just using a unmarried camera to monitor an area, simply go out it set to the default "Id : 01". Prepare a second camera that will be used in a group of multiple cameras
to "02", etc. Press OK after setting.

SD Card Format (delete all files) (Fig. 10)

The brandish will show "FOrN" (see Fig. 11). CAUTION: be certain to backup and save any/all files you desire to go on showtime, every bit formatting will articulate the carte completely of all files-they will then be hard or impossible to recover from the card.

If you are sure you want to format a previously used card, use UP/Down to change the "N" subsequently "FOr_" to "Y" (Yeah), and then press OK to ostend and delete all files from the card.

Restore Default Settings (initialize camera setup) (Fig. eleven)

The display will show "dEFN" (see Fig. 12). To render the Interval, Capture Mode, and Camera ID# to their original, "manufactory default" settings, use UP/Downwards to change the "N" afterward "dEF_" to "Y" (Yes), and then press OK to confirm. Note: your
time and date settings and photographic camera ID# will not exist changed from their electric current settings to the original defaults, and your SD card will not be formatted. Only the Interval and Capture Mode settings will be restored to their defaults.

MOUNTING AND AIMING THE Photographic camera

Mounting

After setting the camera's time/date and other options to your preferences, y'all're gear up to take it outside and begin capturing images of animals in the area yous want to monitor. When setting up the Tasco Trail Photographic camera for scouting game or other
outdoor applications, you must be sure to mount it in identify correctly and deeply. We recommend mounting the Tasco Trail Photographic camera on a sturdy tree with a diameter of well-nigh half-dozen inches. To get the optimal picture show quality, the tree should exist virtually sixteen-17 ft. away from the place to exist monitored, with the camera placed at a height of 2.5-
iii.5 ft. Also, keep in mind that you will get the best results at night when the
subject is inside the platonic wink range, no further than xl ft. and no closer than 10 ft. from the camera.

There are two ways to mount the Tasco Trail Camera: using the provided adjustable web belt, or the tripod socket.

Using the adjustable web chugalug: Push one end of the belt through the ii brackets on the dorsum of the Tasco Trail Photographic camera (Fig. 12). Thread the finish of the strap through the buckle. Fasten the belt securely around the tree body by
pulling the stop of the strap firmly so there is no slack left.

Note: it is not possible to use a cable lock (in the upper part of the subclass) and the web belt at the aforementioned fourth dimension.

Using the tripod socket: The camera is equipped with a socket at the bottom end to enable mounting on a tripod or other mounting accessories that apply a standard1/4-20 thread.

Sensing Angle and Distance Examination

To exam whether the Tasco Trail Camera can effectively monitor the surface area you choose, this test is recommended to bank check the sensing angle and monitoring distance of the Tasco Trail Camera. To perform the examination:

Switch the camera's Power Switch to AIM. You lot can ignore the Setup display, no demand to change whatever settings (provided you already set the time/engagement and other Setup Mode options in advance).
Make movements in front of the camera at several positions within the area where you expect the game or subjects to be. Try different distances and angles from the camera.
If the AIM/Status LED (Fig. 1) blinks, it indicates that position tin exist sensed. If it does not glimmer, that position is outside of the sensing area.

The results of your testing will assist you discover the best placement when mounting and aiming the Tasco Trail Camera. The vertical height away from the footing for placing the device should vary with the animal size appropriately. In full general, 3 to six feet is preferred.

You can avoid potential simulated triggers due to temperature and motion disturbances in front of the camera by not aiming it at a estrus source or nearby tree branches and castor (especially on windy days).

Switching ON the Camera

Once yous move the Ability Switch to ON, the AIM/Condition LED will blink for several seconds. This gives yous fourth dimension to close and lock the front cover of the Tasco Trail Camera and so walk away. During this time, the AIM/Status LED volition blink
continuously.

Afterwards it stops blinking, the PIR sensor is active, and any motion that is detected by it will trigger the capture of photos or videos every bit programmed in Setup Mode. Be sure you have read the camera Setup Style department. Please annotation, the PIR is strongly sensitive to ambient temperature. The greater the temperature difference between the environment and your bailiwick, the farther the possible sensing altitude.

Before leaving the photographic camera unattended, please cheque for the following:

Are the batteries inserted with correct polarity and is their power level sufficient?
Does the SD card have sufficient bachelor space and is its write-protection (lock) switch off?
Is the Ability switch in the ON position? (do non exit information technology set to AIM).

SAVING/VIEWING THE FILES ON YOUR COMPUTER

After you have setup, mounted and activated your Tasco Trail Camera, y'all volition of course be eager to render later on and review the images information technology has captured for you. The all-time mode to do this is to switch the camera OFF and remove the SD card and so you can take it domicile to download and review your photos/videos at leisure.

To proceed using the camera, merely insert some other SD bill of fare (format it starting time in the Setup Fashion menu if necessary, after making sure yous have backed up any files you want to continue that are left on a previously used carte du jour) and switch the camera dorsum ON. The time/engagement and other settings made in Setup Mode will remain unchanged as long as the batteries remain in the photographic camera and provide adequate power for information technology to operate.

Downloading and Reviewing Files From the SD Card

Insert the SD card you removed from your camera into the SD card slot of your computer if it has one, or the SD slot of a USB carte reader accessory (follow the directions provided by the manufacturer).

Depending on the reckoner's operating system, the SD bill of fare's icon and name will then be visible on your desktop, under "Devices with Removable Storage" in "My Reckoner" or in a list of drives and connected devices. Double click the SD card or card reader'southward icon to open up information technology and view the file names (you may need to open up an additional folder or two within the offset level).

Annotation: some computers and operating systems may automatically launch a pop-up window that lets yous view or save the photos/videos on the card soon later it's inserted.

Alternatively, you lot can connect a compatible USB cable (not included) to the USB port on the right side of the camera (Fig. xiii) to your calculator-this is less convenient as it requires removing the camera from the tree. The photographic camera so finer becomes an SD card reader (USB "mass storage device") and can be used as described above.

If the SD card is not recognized by the calculator after 30 seconds (with the card in the photographic camera), try switching the camera to ON or using a dissimilar USB port on the computer (not an unpowered USB hub). Annotation: the mini plug jack next to the USB port is for manufactory service and diagnostic usage only. Practise not connect whatever device to it.

Each new prototype or video will be numbered incrementally in order of the time it was captured. For example, you will see file names such as "00000001.JPG" or "00000001.AVI". Through the file format suffix yous can distinguish whether the file is a still photo (with suffix .jpg) or a video (with suffix .avi).

Your computer should accept the option of allowing you to view the files as preview images instead of file names/types (Windows: More than Options>Small to Large Icons, Mac: View>as Icons). Double clicking any individual file will allow y'all view the photograph or video full screen within whatsoever application is associated with that file format.

Select whatever/all files you desire to backup and drag or copy/paste them to your calculator's hard drive wherever you ordinarily keep photos and videos. You may want to create a new folder named "Tasco Trail Cam" or another specific title to keep them separate from family photos, etc. Once the card'south files have been backed
upwardly, y'all can delete whatever that you determine not to keep.

The aforementioned bill of fare can then be returned to your Tasco Trail Camera for hereafter utilize. Use the format feature in Setup Manner to erase the entire card if yous want to have its full capacity available to shop as many images every bit possible earlier it becomes full and
yous demand to become through this remove > download > backup > format > reuse process once again. Using higher chapters cards and/ or swapping out multiple cards volition allow you lot to practise this less frequently.

TROUBLESHOOTING / FAQ

Camera takes continuous images of no subject A camera has what is known equally a "false trigger" if the PIR sensor thinks that there is motility and heat in front of the camera lens when there is no subject in the image. These "Faux Triggers"
are the result of placing the camera in an surroundings where there is motion associated with tree branches creating motion in forepart of the camera or an area where at that place is high heat in the foreground and any motion from wind could set off the photographic camera. Setting a camera up over h2o is also a potential cause for this issue. To remedy this situation:

Try moving the camera to an expanse that does not accept any of these issues or remove potential obstacles almost the lens if possible.
If the camera continues to take images when in that location is no subject area in them, examination the camera by placing it in an inside environment and aiming at a location where there is no motion.
If the camera continues to take images with no subject, and so there is probably an electronic component issue. If this is the example, please contact Tasco customer service to ship the photographic camera back for repair.

Battery life is shorter than expected

Battery life will vary with operating temperature and the number of images taken over fourth dimension. Typically, the Tasco Trail Photographic camera will be able to capture several m images before the batteries die.
Check to make certain you have used new alkali metal or lithium batteries. Tasco recommends using a full prepare of viii Energizer® Lithium AA batteries to obtain maximum battery life.
Make certain that the ability switch was turned to the ON position and that the camera was non left switched to AIM (Setup manner) while in the field.
Make sure that you are using a good quality proper noun make SD menu in your photographic camera. Tasco recommends SanDisk® brand SD Cards upward to 32GB. Our experience indicates that poor quality SD cards tin can sometimes reduce your
Tasco Trail Camera battery life.

Camera stops taking images or won't take images

Please brand sure that the SD card is not total. If the card is full (display indicates "FULL", the photographic camera volition stop taking images.
Check the batteries to brand sure that they are new alkaline or lithium AA batteries. Meet note higher up about curt battery life.
Brand certain that the Ability/Mode Switch is in the ON position and not ready to OFF or AIM.
Make certain that you are using a skillful quality SD card in your camera. Tasco recommends SanDisk® SD Cards up to 32GB.
If the SD card has its write protect switch in the lock position, the camera will non take images.
If you have used an SD carte in another device before inserting information technology in your Tasco Trail Camera, you lot might want to attempt formatting the menu using the "Format" option in Setup Mode (pg. 8). Make sure y'all have backed up any important files first, as formatting will erase all previous files. In some cases, other devices may change the formatting of the SD menu and then that it will not work properly with the Tasco Trail Camera.

Camera won't power upward

Make sure that y'all have installed all batteries in the battery compartment, filling all battery spaces with no "gaps". Note-the camera may be operated with only four batteries if necessary, but they will need to be changed more oft.
Tasco recommends using a full set of 8 Energizer® Lithium AA batteries.
Make sure that the batteries are installed correctly, observing proper polarity. Always place the negative (flat) end of each battery in contact with the spring side of its slot inside the camera.
After moving the switch from "OFF" to "AIM" or "ON", make sure that the switch is correctly in position to ensure the proper mode (avoid positions "betwixt" 2 modes).
Do non move the switch directly from "ON" to "AIM"- e'er move the switch all the way downward to "OFF" first, then dorsum upwardly to "AIM".

Still Photo and/or Video Quality Problems

Night photos or videos appear too dark
a) Check the bombardment indicator icon to see if bombardment power is full. The wink will finish operating most the terminate of the battery life.
b) You lot will go the best results when the subject is inside the ideal flash range, no farther than 40 anxiety from the photographic camera. Subjects may appear too dark at greater distances.
c) Delight note that when the camera is fix for a rapid sequence (outburst) or 3 Photos, or with very short Interval settings, some images may appear darker than others due to the quick response and rapid retriggering of the camera, allowing less time for the flash to fully recharge earlier firing over again.
Daytime photos or videos appear besides dark
a) Make sure that the photographic camera is not aimed at the lord's day or other light sources during the day, as this may crusade the auto exposure to produce darker results.
Night photos or videos appear too bright
a) You will get the best results when the subject area is inside the ideal flash range, no closer than 10' (3m) from the camera. Subjects may appear besides lite at closer distances.
Daytime photos or videos announced likewise bright/night
a) Brand certain that the photographic camera is not aimed at the dominicus or other light sources during the 24-hour interval.
Blood-red, dark-green or blue color cast
a) Nether certain lighting atmospheric condition, the sensor tin can go dislocated resulting in poor color images.
b). If this is seen on a consistent basis, then the sensor may need servicing. Delight contact Tasco customer service.
Video clips are too brusk/cease prematurely
a) Check to make certain that the SD menu is not full (display reads FULL).
b) Brand certain that the camera has expert batteries in it.
c) Maximum length of videos is 10 seconds per prune to help ensure long battery life.

Date/Fourth dimension Stamp on images is not correct

Make sure that you prepare the current time/engagement in Setup Mode (pg. eight).
Cheque that the batteries yet accept adequate power levels. Always supersede all batteries at the same fourth dimension.

Photos Do Non Capture Subject of Interest

Effort to set your camera upwardly in an expanse where in that location is not a heat source in the photographic camera'southward line of sight.
In some cases, setting the camera near water will make the photographic camera take images with no subject in them. Endeavor aiming the camera over ground.
Try to avoid setting the camera up on small copse that are decumbent to existence moved by potent winds.
Remove any limbs which are correct in front of the camera
lens.

AIM/Status LED Flashes/Doesn't Wink

When the photographic camera'south Ability Switch is set to AIM (Setup Mode), an AIM/Status LED on the front of the camera volition flash when it senses motion. This is for setup purposes only and volition help the user position and aim the photographic camera to check the surface area of detection/coverage.
During utilize, the LED will not flash when the photographic camera takes an image. This is to help keep the camera hidden from game.

LCD Screen Issues

LCD screen powers on but no text is present.
a) Subsequently moving the Power Switch from OFF to AIM or ON" brand certain that the switch is correctly in position to ensure the proper mode (avoid positions "between" two modes).
b) Practice not move the switch directly from ON to AIMalways move the switch all the mode down to OFF outset, so dorsum up to AIM.

Camera won't retain settings

Make certain that y'all accept been saving the changes to any settings that you made while in Setup Mode, by pressing the OK fundamental after changing the setting. If you don't save your new setting after irresolute it, the camera will continue to utilise the original default setting for that item/ choice.

TECHNICAL SPECIFICATIONS

Ane YEAR LIMITED WARRANTY

Your Tasco product is warranted to be free of defects in materials and workmanship for one year afterward the appointment of purchase. In the event of a defect under this warranty, we will, at our option, repair or supercede the production, provided that y'all return the product postage prepaid. This warranty does non comprehend damages caused past misuse, improper handling, installation, or maintenance provided by someone other than a Tasco Authorized Service Department.

Any return fabricated under this warranty must be accompanied by the items listed below:

A check/coin club in the amount of $10.00 to embrace the toll of postage and handling.
Name, accost and daytime phone # for product return.
An explanation of the defect.
Re-create of your dated proof of buy.
Practice not transport in accessories (batteries, SD cards, cables), but the
product for repair. Product should be well packed in a sturdy exterior aircraft carton to prevent damage in transit, and shipped to the accost listed below:

IN U.S.A. Transport To:
Tasco
Attn.: Repairs
9200 Cody
Overland Park, Kansas 66214

IN CANADA Send To:
Tasco
Attn.: Repairs
140 Great Gulf Drive, Unit # B
Vaughan, Ontario L4K 5W5

For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information.

In Europe yous may also contact Tasco at: Tasco Germany GmbH

European Service Centre
Mathias-Brüggen-Str. eighty
D-50827 Köln
Frg
Tel: +49 221 995568-0
Fax: +49 221 995568-20

This warranty gives yous specific legal rights.
You may have other rights which vary from state to country.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to function 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Operation is subject to the post-obit two conditions:

This device may not cause harmful interference, and
This device must have any interference received, including interference that may cause undesired functioning.

This equipment generates, uses and tin radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference volition not occur in a particular installation.
If this equipment does crusade harmful interference to radio or boob tube reception, which can exist determined by turning the equipment off and on, the user is encouraged to effort to correct the interference past one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a excursion different from that to which the receiver is connected.
Consult the dealer or an experienced radio/Tv set technician for help.

The device does non contain any user-serviceable parts. Repairs should merely exist made by an Authorized Bushnell repair centre. Unauthorized repairs or modifications could upshot in permanent damage to the equipment, and will void your warranty and your authorisation to operate this device nether Part xv regulations.

The shielded interface cable which is provided must be used with the equipment in order to comply with the limits for a digital device pursuant to
Subpart B of Part fifteen of FCC Rules.

For further questions or additional data please contact:

TASCO
9200 Cody
Overland Park, KS 66214
1-800-423-3537
www.tasco.com

Read More than Well-nigh This User Manuals…

Tasco-Trail-Photographic camera-Educational activity-Manual-Optimized.pdf

Ezoic

Tasco-Trail-Photographic camera-Instruction-Manual-Orginal.pdf

Source: https://manuals.plus/tasco/tasco-trail-camera-instruction-manual-119270cw-119271cw

Posted by: reidgropen.blogspot.com